Download OpenAPI specification:Download
A REST interface for state queries, legacy transactions
| min_liquidity |
string
String of the coins in single string seperated by comma. Ex) 10uatom,100uosmo. |
| pool_type |
string
|
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| denom |
string
Desired denom when querying active gauges. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
owner
required
|
string
Address that is being queried for future estimated rewards |
| lock_ids |
Array of strings
<uint64>
Lock IDs included in future reward estimation. |
| end_epoch |
string
<int64>
Upper time limit of reward estimation Lower limit is current epoch. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| denom |
string
Filter for upcoming gauges that match specific denom. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
Since: cosmos-sdk 0.43
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| granter |
string
|
| grantee |
string
|
| msg_type_url |
string
Optional, msg_type_url, when set, will query only grants matching given msg type. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
grantee
required
|
string
|
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
granter
required
|
string
|
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
address
required
|
string
address is the address to query balances for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
validator_address
required
|
string
validator_address defines the validator address to query for. |
| starting_height |
string
<uint64>
starting_height defines the optional starting height to query the slashes. |
| ending_height |
string
<uint64>
starting_height defines the optional ending height to query the slashes. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
grantee
required
|
string
|
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| proposal_status |
string
Default:
"PROPOSAL_STATUS_UNSPECIFIED"
Enum:
"PROPOSAL_STATUS_UNSPECIFIED"
"PROPOSAL_STATUS_DEPOSIT_PERIOD"
"PROPOSAL_STATUS_VOTING_PERIOD"
"PROPOSAL_STATUS_PASSED"
"PROPOSAL_STATUS_REJECTED"
"PROPOSAL_STATUS_FAILED"
proposal_status defines the status of the proposals.
|
| voter |
string
voter defines the voter address for the proposals. |
| depositor |
string
depositor defines the deposit addresses from the proposals. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
proposal_id
required
|
string
<uint64>
proposal_id defines the unique id of the proposal. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
proposal_id
required
|
string
<uint64>
proposal_id defines the unique id of the proposal. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
delegator_addr
required
|
string
delegator_addr defines the delegator address to query for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
delegator_addr
required
|
string
delegator_addr defines the delegator address to query for. |
| src_validator_addr |
string
src_validator_addr defines the validator address to redelegate from. |
| dst_validator_addr |
string
dst_validator_addr defines the validator address to redelegate to. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
delegator_addr
required
|
string
delegator_addr defines the delegator address to query for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
delegator_addr
required
|
string
delegator_addr defines the delegator address to query for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| status |
string
status enables to query for validators matching a given status. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
validator_addr
required
|
string
validator_addr defines the validator address to query for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
validator_addr
required
|
string
validator_addr defines the validator address to query for. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
last_height
required
|
string
<int64>
last height of the current chain must be sent in request as this is the height under which next consensus state is stored |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
height
required
|
string
<int64>
|
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
|
object
(cosmos.tx.v1beta1.Tx)
Tx is the standard type used for broadcasting transactions. |
|
| tx_bytes |
string
<byte>
tx_bytes is the raw transaction. Since: cosmos-sdk 0.43 |
{
-
"tx":
{
-
"body":
{
-
"messages":
[
-
{
-
"type_url":
"string",
-
"value":
"string"
}
],
-
"memo":
"string",
-
"timeout_height":
"string",
-
"extension_options":
[
-
{
-
"type_url":
"string",
-
"value":
"string"
}
],
-
"non_critical_extension_options":
[
-
{
-
"type_url":
"string",
-
"value":
"string"
}
]
},
-
"auth_info":
{
-
"signer_infos":
[
-
{
-
"public_key":
{
-
"type_url":
"string",
-
"value":
"string"
},
-
"mode_info":
{
-
"single":
{
-
"mode":
"SIGN_MODE_UNSPECIFIED"
},
-
"multi":
{
-
"bitarray":
{
-
"extra_bits_stored":
0,
-
"elems":
"string"
},
-
"mode_infos":
[
-
{
}
]
}
},
-
"sequence":
"string"
}
],
-
"fee":
{
-
"amount":
[
-
{
-
"denom":
"string",
-
"amount":
"string"
}
],
-
"gas_limit":
"string",
-
"payer":
"string",
-
"granter":
"string"
}
},
-
"signatures":
[
-
"string"
]
},
-
"tx_bytes":
"string"
}
| events |
Array of strings
events is the list of transaction event type. |
| pagination.key |
string
<byte>
key is a value returned in PageResponse.next_key to begin querying the next page most efficiently. Only one of offset or key should be set. |
| pagination.offset |
string
<uint64>
offset is a numeric offset that can be used when key is unavailable. It is less efficient than using key. Only one of offset or key should be set. |
| pagination.limit |
string
<uint64>
limit is the total number of results to be returned in the result page. If left empty it will default to a value to be set by each app. |
| pagination.count_total |
boolean
count_total is set to true to indicate that the result set should include a count of the total number of items available for pagination in UIs. count_total is only respected when offset is used. It is ignored when key is set. |
| pagination.reverse |
boolean
reverse is set to true if results are to be returned in the descending order. Since: cosmos-sdk 0.43 |
| order_by |
string
Default:
"ORDER_BY_UNSPECIFIED"
Enum:
"ORDER_BY_UNSPECIFIED"
"ORDER_BY_ASC"
"ORDER_BY_DESC"
|
| tx_bytes |
string
<byte>
tx_bytes is the raw transaction. |
| mode |
string
Default:
"BROADCAST_MODE_UNSPECIFIED"
Enum:
"BROADCAST_MODE_UNSPECIFIED"
"BROADCAST_MODE_BLOCK"
"BROADCAST_MODE_SYNC"
"BROADCAST_MODE_ASYNC"
BroadcastMode specifies the broadcast mode for the TxService.Broadcast RPC method.
|
{
-
"tx_bytes":
"string",
-
"mode":
"BROADCAST_MODE_UNSPECIFIED"
}